Bottom-airflow pod Spec Sheet Reading Guide for 2026
The right answer on bottom-airflow pod depends on three things at once: the kit class, the liquids it will be paired with, and the rules of the destination marketplace. We cover all three in the guide below.
The product class matters: bottom-airflow pod is judged on how consistently it performs across weeks of daily use, not just on a polished first impression. Retail sourcing teams in Greece increasingly test this themselves prior to placing repeat purchases.
When vapers and informed sourcing teams ask what a normal purchase looks like in 2026, the working figures are an entry MOQ near 150 units, a 45% initial payment, 5 weeks of production and 10-day pre-production unit shipping, with a 1.9% defect allowance and 4% spare components written into the contract in Greece. They are planning figures, not promises, but a formal quote far outside them deserves a direct question.
What exactly is bottom-airflow pod?
bottom-airflow pod sits within the broader RELX-compatible pod system product class and follows the same basic principles: a heating element vapourises liquid drawn from a reservoir, and the experience is shaped by resistance, airflow and the liquid's PG/VG balance. The details below are the specifications sourcing teams ask about most.
Modern examples are defined less by raw power and more by refinement: consistent output, leak-resistant construction and charging standards that match current retail expectations in Greece.
| Feature | Typical specification |
|---|---|
| E-liquid capacity | 2.0 ml (TPD-style) |
| Coil resistance | 0.6–1.3 ohm |
| Battery capacity | 504–949 mAh |
| Fill style | top fill |
| Charging | micro-USB on older stock |
| Draw style | MTL, draw or button activated |
Who this guide is written for
It is for vapers and informed sourcing teams. If you run a shop, the specification table helps you brief shop-floor teams; if you procure for personal use, the same details prevent the most widespread mismatch errors.
What to check prior to you purchase
Replacement-part availability
A kit is only as sellable as its substitute pods or coils. Confirm the consumable roadmap prior to building a fixture around a new model.
Responsibly designed packaging
Child-resistant closures, tamper evidence and recyclable outer cartons increasingly protect retail shops from both accidents and regulatory friction.
Liquid friendliness
Very sweet liquids wear coils faster, while thick high-VG blends can starve narrow wicks. Match the unit to the liquid profile your shoppers actually procure.
True total cost
Look past the sticker price. Substitute coils, pods, charging cables and the liquid itself all change the cost of ownership, especially when equipment is bought in volume for resale.
Seals, airflow and leak behaviour
Well-designed fill ports, seated O-rings and controlled airflow prevent most of the leaks that generate support tickets. Ask to see travel and altitude testing notes prior to committing to a substantial purchase.
Ordering terms
MOQ tiers, lead time, payment structure and spare-parts ratios belong in the first conversation, not following a initial payment has been paid.
Two customs details belong on every worksheet here: the Greek warning text block and the harmonised-code description attached to the commercial invoice. In everyday planning that pairs with 54-carton pallets and a freeze on artwork changes 7 days prior to vessel loading in Greece.
Practical price points for bottom-airflow pod
| Tier | Indicative price (EUR) |
|---|---|
| Budget | €13.80 |
| Mid range | €29.44 |
| Higher-end | €69.92 |
Indicative shelf prices; actual street prices move with taxes, promotions and channel. Currency here is EUR; request a live formal quote because metals, cells and freight all move prices during the year.
Errors sourcing teams repeatedly make
- Ordering from a render instead of a physical pre-production pre-production unit
- Ignoring coil availability when choosing a kit
- Treating all 20 mg liquids as interchangeable across equipment
- Under-budgeting for duty, QC inspection and spare components
- Accepting packaging artwork without compliance sign-off
- Skipping pre-shipment QC inspection on repeat purchases
- Building a fixture around a model with no consumable roadmap
Maintenance and care
- Clean contacts and connectors monthly with a dry or lightly dampened cloth.
- Keep kits and liquids out of direct heat and strong sunlight.
- Prime fresh coils and allow five minutes of saturation prior to first use.
- Replace coils at the first persistent dry note rather than pushing them.
- Store batteries in insulated cases and never loose with keys or coins.
- Rotate liquid stock first-in, first-out and observe expiry dates.
One procedural habit separates smooth purchases from difficult ones: finish compliance sign-off and labelling review first, inspect at AQL 4.0 prior to the balance payment, and allow 5 weeks of sea-freight buffer in busy seasons in Greece. The VVVapeship operations desk on +86 18826441634 (WhatsApp/WeChat 18826441634) can send a timeline template for this exact product class.
Talk to VVVapeship
VVVapeship supplies vapers and informed sourcing teams with documented equipment, liquids and consumables, and every purchase is matched to its destination marketplace prior to paperwork is issued. For current price points, MOQs and the compliance file list, reach out directly:
- Phone and WhatsApp: +86 18826441634
- WeChat ID: 18826441634
- Reply within one business day, with spec sheets attached.
- Request the current 2026 wholesale price book and pre-production unit policy.
When you are ready, the fastest route is a short message describing the quantities and the destination marketplace. The VVVapeship team replies with a matching specification sheet, current price points and the compliance documents relevant to the purchase.
Questions & answers
Can I purchase bottom-airflow pod with custom packaging?
Yes. Custom cartons, inserts and warning text can be specified, but artwork, certification responsibility and lead times ought to be agreed in documented form prior to the pre-production pre-production unit is approved.
Which compliance documents ship with the purchase?
That depends on the destination. Typical files contain safety lab reports, battery transport evidence where applicable, ingredient listings and notification references. Request the exact list for your marketplace.
Do prices contain customs duty and tax?
Not by default. Quotations normally show factory terms; landed cost must add freight, insurance, duty and import tax. Request both FOB and DDP-style figures if you want to weigh complete costs.
Are these product lines appropriate for the Greece marketplace?
Suitability depends on current local rules, which change regularly. Share the destination country, and the team will flag the records and unit configuration that marketplace calls for, or advise against an purchase where rules do not allow it.
What is the minimum purchase quantity for bottom-airflow pod?
MOQs vary by model and by whether branding is involved. Catalogue equipment commonly starts at master carton level, while private-label projects run higher. Send your target quantity for an exact figure.